SST- Cold Spray Equipment
The SST Cold Spray product line includes both standard and custom solutions. SST products combine our expertise in the cold spray technology and our design and build capabilities for manual, automated, and robotics production equipment.
In addition to equipment, SST offers a wide range of feed-stock powders, accessories, and services that provide unique and practical benefits to integrating cold spray coatings into your production and maintenance operations.
PX Cold Spray Systems
The PX System incorporates improvements to the proven first-generation Series P systems. The PX is ideal for spraying the full range of commercial powders and powder blends available from CenterLine.
The next generation of SST™ Cold Spray systems integrate the latest powder feed System:
- Non-pressurized feeder is non-clogging, and requires reduced maintenance
- Powder feed consistency is independent of powder fill levels for dependable application performance
- Feeders can easily be removed and filled in a ventilated area
- Less than 10 minutes needed for powder changeover
- Feeder swap within 5 minutes to optimize run-time
- Powder volume capacity 1000 ml per feeder, 2 feeders per machine
- Powder feed rates up to 120 g/m in compared to 80 g/min for previous design (using A0050 Aluminum powder)
| PX System | |||
| PX Cabinet | Manual Spray Gun | Automatic Spray Gun | |
| Pressure Range | 100-250 psi | ||
| Temperature Range | Ambient to 550 °C | ||
| Weight | 78 Kg (172 lbs.) | 2 Kg (4.5 lbs.) | 2.2 Kg (5 lbs.) |
| Dimensions | 23” x 20” x 44” | 15.75” x 4” x8.25” | 20” x 3.75” x 7.5” |
| Power Requirements | 240 Volts +/- 2% 1 ph 30 Amps | ||
| Powder Feed Rate | 6 to 36 g/min |
EPX Cold Spray Systems
The EPX system is an upgrade to the Series EP and now comes with an integrated powder feed system. It is designed to cold spray at higher pressures for harder materials with a greater deposition efficiency. The EPX is ideal for spraying aluminum alloys, nickel and nickel.
The next generation of SST™ Cold Spray systems integrate the latest powder feed System:
- Non-pressurized feeder is non-clogging, and requires reduced maintenance
- Powder feed consistency is independent of powder fill levels for dependable application performance
- Feeders can easily be removed and filled in a ventilated area
- Less than 10 minutes needed for powder changeover
- Feeder swap within 5 minutes to optimize run-time
- Powder volume capacity 1000 ml per feeder, 2 feeders per machine
- Powder feed rates up to 120 g/m in compared to 80 g/min for previous design (using A0050 Aluminum powder)
| EPX System | ||
| PX Cabinet | Automatic Spray Gun | |
| Pressure Range | 100-500 psi | |
| Temperature Range | Ambient to 550 °C | |
| Weight | 87 Kg (193 lbs.) | 22.7 Kg (50 lbs.) |
| Dimensions | 27” x 22” x 44” | 14” x 5” x 30” |
| Power Requirements | 480 Volts +/- 2% 3 ph 30 Amps | |
| Powder Feed Rate | 12 to 80 g/min |
PX & EPX Cold Spray Guns
Manual and Automatic Spray Guns
3.8 Kw PX Manual Gun
4.25 Kw PX Automatic Gun
15 Kw EPX Automatic Gun
Additional system features:
- Spray nozzle orifice is not a consumable; two-part UltiLife’ and UltiFlow’ nozzle technology provides long life and anti-clogging capabilities
- Quick change adapter design for ease of nozzle positioning and exchange
- Redefined heater control loop for improved temperature stability
- Calibration kit available to verify temperature and pressure operating parameters
- Depending on model, warm up time to stable temperature is 60 to 90 seconds
- Non-pressurized design is practical, simpler and more reliable
- Extended consumable service life
- Reduced nozzle consumable cost per lbs. sprayed
PX & EPX Cold Spray Nozzles
UltiLife™ and UltiFlow™ Modular Nozzles
These unique and practical nozzle designs provide a choice to coat pure or hard/abrasive materials. The nozzle changeover requires no tools and is automation friendly.
| Nozzle Holder | ||
| Orifice Size | 2.0 mm & 2.5 mm | |
| Nozzle Style | Straight & 90° | |
| Nozzles | UltiLife™ | UltiFlow™ |
| Length | 70 mm & 120 MM | |
| System Adaptability | PX. EPX Handheld & Robotic | |
| Max Operating Temperature | 550 °C | 500 °C |
| Max Pressure | 34 bar (500 psi) | |
SST Powders
- Pure and blended formulations for SST Cold Spray processes
- Globally sourced powders
- Environmentally controlled blending facility
- Packaged with desiccants
- Material certifications
- Fully compliant with transportation requirements
- Competitively priced
Cold Spray Integrated Systems
Walk-in Manual Spray Booth with Wet Dust Collection System
- 87” Deep x 72” Wide x 89” booth Enclosure Complete with 72” x 41” x 36” high work surface
- 5,000 CFM Wet Dust Collector
- Portable SST PX with Integrated Feeders
Cold Spray Integrated Systems
Features / Benefits
- Robotic Spray system
- Single drop 480V 3-phase drop. FLA is 100A.
- Yaskawa MH24, DX200 robot with 24Kg capacity, Robot Suit for dust protection with blower to positively pressurized the Robot Suit, Cable management system, System Integration that allows maximum flexibility developing Cold Spray patterns, and spraying on various geometries
- Rotary table with 200 Lb. capacity and max. rpm of 50 and with servo 7th axis from robot control.
- OD: 8’-8” w. x 5’-8” D. x 6’-8” H.
- 4” thick Type “H” wall, ceiling, and floor Panel system for noise abatement
- 16 Ga. Solid exterior face, 4” Acoustic fill, bonded mat.
- 22 Ga. perforated inner face
- Double door 84” W. x 56” H., RH. On 96” wall
- Doors shall be 3 1/4” thick with double magnetic gaskets and Stainless steel zero hinges
- 24” W. x 36” H Double glazed (Limo Tint) window panel
- One plenum 36” W.36” H on 60” wall
- One ceiling light with switch
- Wet Dust Collection System that will provide minimum 6,500 CFM, and face velocity of 150 feet per minute within the cabinet